BEP Easy Fit Battery Switch - 275A Continuous
- Auf Lager
- Nachbestellt, bald verfügbar
- Pay no sales tax outside of Michigan
- Free shipping on orders over $75
- 30 day return policy*
- 2 day shipping & overnight available. Call for rates! 248-895-6013
Easy Fit Battery Switch - 275A Continuous
The Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.
Features:
Manufacturer : BEP Marine
Manufacturer Part No : 700
UPC : 870216000169
The Easyfit Battery Switch was created for installations where switches need to be recessed through varying thicknesses of panels. It achieves this through an easily removable threaded ring that allows for panel thicknesses up to 3/4" (19 mm). This switch uses the same features as the 701 with the removable key 45 degree past the off position, labeled handle and a removable back cover covering exposed terminals to meet ABYC specifications. It can also be surface mounted offering a unique style compared to other switches available on the market. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without the rear terminals exceeding 100 deg C (212 deg F) above the ambient temperature. The continuous and intermittent ratings are tested at 110% of specified ratings. All BEP switches are tested Independently to this specification by a 3rd party laboratory.
Features:
- Can easily be retro-fitted in place of most European post and lever type switches
- Molded in high temperature, fiber reinforced plastics
- Tin-plated copper studs and nuts
- Ignition-protected
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Manufacturer : BEP Marine
Manufacturer Part No : 700
UPC : 870216000169
Rates from 0%-36% APR. Payment options through Shop Pay Installments, are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. State notices to consumers https://www.affirm.com/licenses.
Facebook Client Reviews
Where do I start! This man is a genius, I may have ordered a amateurs dream from this man, went all out on garmin products from gpsmap screens to the live scope lv34 and to juice them up I went with all powerhouse batteries and charging units! Well now on the boat I’m staring at this out dated minnkota and it just looked out of place so I went ahead and ordered up the KRAKEN! I can’t stop bragging on how much you have helped me, even face timing me on the water to fine tune my Livescope, there is no big box store that could even come close to offer this level of customer service! You will forever be my go to company! Thank you again!
Yoshi Johnson, Illinois
Very fast shipping. Very knowledgeable guy to deal with. I inquired after hours and Chad responded quickly and chatted with me for way longer than necessary because I knew nothing about livescope. Who offers there cell phone number to call with any install questions??? Chad does. I got a friend request from him and accepted. Felt like I bought from someone who values my purchase as well as my friendship. We may never meet but I feel like I have gained a great friend. Thanks Chad for all your time spent explaining what I wanted and giving me choices. This won't be my last purchase..
Mark Teel, Texas
It has been a pleasure dealing with Chad at Chaddy Boys! I had contacted him many times on the phone and has been very helpful! I felt like we had been old friends for a long period of time! Chad sent me many quotes and was very helpful on choosing the electronics setup I was seeking! I ordered my unit and received it on exact date I was quoted! I will definitely be buying from Chaddy Boys again!
Shane Bramlett
This 16 volt battery and Run and Gun Charger is the only way to outfit your boat. Fish all day with no worries. Chad is very knowledgeable and helpful with the everything you need for a great day on the water. Now just waiting for a 36 volt to have the perfect setup. Thanks Chad.
Update* Well we just installed the second battery and run and gun charger. Took out 3 lead acid and about 120 lbs. Looking forward to the new system. Gonna be awesome. Thanks again Chad
Heather & Randy Moore, Florida/Canada
School of Large Mouth on side imaging
We offer on the water Face-Time calls for product install, setup & graph tuning for side-Imaging, down-imaging & livescope! I took this side scan image 4 years ago.
How many fish do you count?
Lets get it straight, we’re anglers first..
Never trust a skinny chef. My staff & I are all believers in the product we sell & USE. Whether it’s weekends at the lake, Wednesday night derbys, or the Bassmaster Elite Series. We've got you covered. We pride ourselves on answering the phone & providing you excellent customer service.
