NAVPOD RMX4900-01 Railmount
Model: RMX4900-01RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Nickel Chrome-Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.
RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch chartplotters.
Structural Rigidity — The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal — All RailMount NavPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome-Plated Stainless Steel — We use all 316 stainless steel hardware that is supplied with each NavPod. Large round-head tamper-resistant screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. The Nickel Chrome-Plated Stainless Steel tamper-resistant screws provide security combined with a little style!
1
Specifications| Overall | |
| Height | |
| in | 11.61 |
| cm | 29.5 |
| Width | |
| in | 14.25 |
| Width | 36.2 |
| Depth | |
| in | 7.72 |
| cm | 19.6 |
| Usable Face | |
| Height | 7.39 |
| in | 7.39 |
| cm | 18.8 |
| Width | |
| in | 12.36 |
| cm | 31.4 |
| Depth | |
| in | 5.29 |
| cm | 13.4 |
| Max Cutout | |
| Height | |
| in | 8.09 |
| cm | 20.5 |
| Width | |
| in | 13.26 |
| cm | 33.7 |
| RMX Radius | |
| Height | |
| in | 2.75 |
| cm | 7.0 |
| Width | |
| in | 6.98 |
| cm | 17.7 |
| View Angle | 30 |
Where do I start! This man is a genius, I may have ordered a amateurs dream from this man, went all out on garmin products from gpsmap screens to the live scope lv34 and to juice them up I went with all powerhouse batteries and charging units! Well now on the boat I’m staring at this out dated minnkota and it just looked out of place so I went ahead and ordered up the KRAKEN! I can’t stop bragging on how much you have helped me, even face timing me on the water to fine tune my Livescope, there is no big box store that could even come close to offer this level of customer service! You will forever be my go to company! Thank you again!
Yoshi Johnson, Illinois
Very fast shipping. Very knowledgeable guy to deal with. I inquired after hours and Chad responded quickly and chatted with me for way longer than necessary because I knew nothing about livescope. Who offers there cell phone number to call with any install questions??? Chad does. I got a friend request from him and accepted. Felt like I bought from someone who values my purchase as well as my friendship. We may never meet but I feel like I have gained a great friend. Thanks Chad for all your time spent explaining what I wanted and giving me choices. This won't be my last purchase..
Mark Teel, Texas
It has been a pleasure dealing with Chad at Chaddy Boys! I had contacted him many times on the phone and has been very helpful! I felt like we had been old friends for a long period of time! Chad sent me many quotes and was very helpful on choosing the electronics setup I was seeking! I ordered my unit and received it on exact date I was quoted! I will definitely be buying from Chaddy Boys again!
Shane Bramlett
This 16 volt battery and Run and Gun Charger is the only way to outfit your boat. Fish all day with no worries. Chad is very knowledgeable and helpful with the everything you need for a great day on the water. Now just waiting for a 36 volt to have the perfect setup. Thanks Chad.
Update* Well we just installed the second battery and run and gun charger. Took out 3 lead acid and about 120 lbs. Looking forward to the new system. Gonna be awesome. Thanks again Chad
Heather & Randy Moore, Florida/Canada
We offer on the water Face-Time calls for product install, setup & graph tuning for side-Imaging, down-imaging & livescope! I took this side scan image 4 years ago.
How many fish do you count?
Never trust a skinny chef. My staff & I are all believers in the product we sell & USE. Whether it’s weekends at the lake, Wednesday night derbys, or the Bassmaster Elite Series. We've got you covered. We pride ourselves on answering the phone & providing you excellent customer service.
