Reliable Mobile Power from Magnum Energy
The ME Series Inverter/Charger from Magnum Energy is a new generation inverter designed specifically for rugged mobile applications. The ME Series is powerful, easy-to-use, and best of all, cost effective.
Safe and reliable: The ME Series is ETL Listed to the stringent requirements of UL/cUL 458 and CSA C22.2 #107.1-01, ensuring that the inverter is safe and reliable.
Easy-to-install: Install the ME Series in four easy steps: simply connect the inverter's output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter's
easy-to-reach terminal block, connect the batteries, and switch on the power.
Features
The ME Series Inverter/Charger is loaded with features:
Power Factor Corrected (PFC) Charger: The charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using only 15 amps per 100 amps versus 23 amps used by standard chargers.
Choices: The ME Series comes in three power models, allowing you to choose the model that is right for you.
Versatile mounting: Mount the ME Series on a shelf, bulkhead, or even upside down.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay: 60 Amp transfer service is available on all models.
Buy with ease: The ME Series is backed by a three-year (36-month) limited warranty.
Accessories and Options*
Remote control: For convenient finger-tip operation, including the new one-knob? programming.
AGS module: Automatically starts and stops your generator based on temperature or battery voltage.
Inverter Specification | ME2012 | ME2512 | ME3112 |
Input battery voltage range | 9 - 16 VDC | 9 - 16 VDC | 9 - 16 VDC |
Nominal AC output voltage | 120 VAC | 120 VAC | 120 VAC |
Output frequency and accuracy | 60 hz 0.1Hz | 60 hz 0.1Hz | 60 hz 0.1Hz |
1 msec surge current (amps AC) | 60 | 100 | 120 |
100 msec surge current (amps AC) | 37 | 45 | 50 |
5 sec surge power (real watts) | 3700 | 5000 | 6000 |
30 sec surge power (real watts) | 3450 | 4500 | 4800 |
5 minute surge power (real watts) | 3100 | 3500 | 3950 |
30 minute surge power (real watts) | 2400 | 2900 | 3500 |
Continuous power at 45° C | 2000 VA | 2500 VA | 3100 VA |
Maximum continuous input current | 266 ADC | 333 ADC | 413 ADC |
Inverter efficiency (peak) | 95% | 91% | 90% |
Transfer time | 16 msecs | 16 msecs | 16 msecs |
Search mode ( Typical) | 5 watts | 5 watts | 5 watts |
No load ( 120 VAC output ) Typical | 20 watts | 23 watts | 25 watts |
Wave Form | Modified Sine Wave |
Charger Specifications |
Continuous output at 45° C | 100 ADC | 120 ADC | 160 ADC |
Charger efficiency | 85% | 85% | 85% |
Power factor | > .95 | > .95 | > .95 |
Input current at rated output (AC amps) | 15 | 18 | 21 |
General Features and Capabilities |
Transfer relay capability | 2 legs at 30 A for 120 V/30 A or 240 V/60 A service |
Five stage charging capability | Bulk, Absorb, Float, Equalize, and Battery Saver™ |
Battery temperature Compensation | Yes, 15 foot battery temp sensor standard |
Internal cooling | 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans |
Overcorrect protection | Yes, with two overlapping circuits |
Conformal coating on PCB's for corrosion protection | Yes |
Over temperature protection | Yes, On Transformer, MOSFETS, and battery |
Stainless steel fasteners for corrosion protection | Yes |
Dual AC branch rated output breakers | On the ME2012-20B only - AC breakers in 20 amp ratings |
Listings | ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01 |
Warranty | 3 Years |
Environmental Specifications |
Operating temperature | -20° C to +60° C (-4° F to 140° F) |
Nonoperating temperature | -40° C to +70° C (-40° F to 158° F) |
Operating humidity | 0 to 95% RH non condensing |
Physical Specifications |
Dimensions (h x w x d) | 13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm) |
Mounting | Shelf (top or bottom up) or bulkhead (vents up) |
Max operating altitude | 15,000 feet |
Weight | 37 lb | 41 lb | 46 lb |